JASU ISB800-4 Single Stage Injection Blow Machine for PET Bottles
Product Description
JASU ISB800-4 single stage injection blow machine for pet bottles
High performance
High effective
High energy saving
Typical Products for Injection Blow Molding
JARS – These are made in PP, HDPE, PS, MIPS, SAN etc. Jars are made in a wide variety of materials. The process advantage is that no secondary trimming (scrap) is required when making the neck finish. Ovaloid neck (petroleum jelly) jars can be made by injection molding the neck finish..........................................................................................................................................................................
ONE PIECE ROLL-ON DEODORANTS in PP and HDPE. Close tolerance of the injection moulded ball seating allows an even application of the deodorant product. Snap-on ball housings are also used on SAN and PET bottles used for clarity.
.........................................................................................................................................................................
DROPPER BOTTLES – Usually produced in virgin PET. JASU IBM machines are installed in clean manufacturing environments worldwide. The bottles can be stripped from the core rods whilst still very hot and transported to the clean room in sterile air for packing.
.........................................................................................................................................................................
TABLET and PILL BOTTLES(Pharmacy Bottle) – These are made from PP, HDPE, LDPE and PS. These bottles can be designed with complicated injected neck finishes for Child Resistance or pilfer-proofing. Also the neck finish is excellent for barrier seals against moisture with a plug seal closure, and also very flat for tamper foil application.
.........................................................................................................................................................................
Sport bottles(Space bottles) – These bottles are mainly made in PC. Up to 4 cavity molds from 15-20 second cycles. QUALITY PRODUCTS do not cause problems on decoration, filling or capping lines, and are less liable to bring customer complaint.
.........................................................................................................................................................................
LED Lampshade – PC/PET lamp cover for energy saving light
Products Video:
Products Photos:
JASU injection blow molding machine advantages:
1.Electrical motor and pneumatic drive, avoid hydraulic dirty product.2.Full automatic control, easy operation.
3.Material barrel and hot runner temperature control accurately.
4.Save more cost than traditional machine.
5.Compact structure.
6. Injection:
Hot runner and temperature control device and standard configuration
Only change mold to make a new product.
Blow:
Hydraulic mold clamping, core insert, blow and bottom molding are standard
configuration.
Product release: ejector is a standard device.
Compare Injection Blow Molding to Extrusion Blow Molding
Injection Blow Moulding | Extrusion Blow Molding |
No scrap | 20-40% scrap during production |
Uniform wall thickness | Wall thickness variation |
Bottle weight variation of 1% | Bottle weight variation of 3% |
Slower cycle time / more cavities | Fast cycle time / less cavities |
Thin walls difficult to control | Thick & thin wall capabilities |
Hollow Handleware not possible | Hollow Handleware |
Necks made with injection molded tolerances | Necks made with blow molded tolerances |
One technician per 4-6 machines | One technician per 1-2 machines |
Process is controlled and repeatable with no adjustments | Variable process requiring constant adjustment |
Almost no ancillary equipment | Lots of ancillary equipment needed |
S/N | Item | Parameter | |||
ISB 800-4 | |||||
1 | Injection Part | Screw Diameter | 40mm | ||
2 | Screw L/D Ratio | 20.5:1 | |||
3 | Screw Speed | 0-190r/min | |||
4 | Theoretical Injection Capacity | 238cm³ | |||
5 | Injection Pressure | 174Mpa | |||
6 | Max. Hydraulic Pressure | 140Kg/cm | |||
7 | The Actual Injection Quantity | 225g | |||
8 | 8Oz | ||||
9 | Screw Stroke | 190mm | |||
10 | Clamping Part | Blow Clamping Force | 80Kn | ||
11 | Clamp Tonnage | 400Kn | |||
12 | Wheel Diameter | 800mm | |||
13 | Max. Height of Bottle | 145mm | |||
14 | Open Vertical Mode Trip | 430mm | |||
15 | Other | Max. Pump Pressure | 16Mpa | ||
16 | Motor | 18.5Kw | |||
17 | Electric Power | 8.9Kw | |||
18 | Tank Volume | 400L | |||
19 | Dimension | 3.8X1.45X3.0m | |||
20 | Weight | 5Ton |
Email to this supplier
![](http://pt.jasucorp.com/application/views/default/img/ct.png)