H-1400T Horizontal Boring Milling Machining Center
Product Description
Feature:
1.T shape base, worktable only moves in Z axis. So it can load heavier part.
2.Low gravity center of entire machine, so machine has better rigidity.
3.Casting body adopts box shape structure with internal built-in reinforced ribs, so machine has better vibration resistance and heat resistance.
4.X axis guide rails are in ladder shape, so column can withstand large front impact from machining. It is very good at inner hole boring and milling.
6.This machine is exactly suitable for box shape workpiece machining, like engine and gearbox shell.
7.Twin chip augers locate each side of casting base, which can efficiently discharge cutting chips.8.Optional gearbox spindle with larger output torque for heavy duty machining.
Machine Parameter:
Item | H-1400T |
Worktable | |
Worktable size | 1400 X 700 mm |
T-slot size | 5 X 18 X 142 mm |
Max.loading capacity | 2000 kg |
NC index table (Opt.) | 630 |
Table size | 630x630 |
Min. Index degree | 0.001° |
Index accuracy | 15 sec |
Repeated accuracy | 6 sec |
Allowed loading capacity | 1200 kg |
Travel | |
X/Y/Z axis traverse | 1400/900/700 mm |
Spindle center to table | 320-1220 mm |
Spindle end face to table center | 175-875 mm |
Spindle | |
Spindle taper | BT50 |
Spindle speed | 6000 rpm |
Spindle drive | Belt driven |
Feeding | |
Max. cutting feedrate | 4000 mm/min |
Rapid traverse of 3 axes | 20/20/20 m/min |
Ballscrew size |
|
Positioning accuracy (JIS) | ±0.003/300 mm |
Repeated positioning accuracy (JIS) | ±0.003 mm |
ATC | |
ATC type | Arm type |
Tool capacity | 24 |
Max. tool dia. | 112 mm |
Max. tool length | 300 mm |
Max. tool weight | 15 kg |
Tool holder | BT50 |
Tool change time (T-T) | <4.8 Sec. |
Motor power | |
Spindle motor | 15/18.5 kw |
X/Y/Z axis motors | 3.0/3.0/3.0 kw |
Coolant pump motor | 0.49 kw |
General | |
Air requirement | 8 kg |
Overall Dimension | 3800 x 23000 x 3200 mm |
N.W. | 15000 kg |
Standard accessories: 1.FANUC CNC controller 0i-TF 2.RS-232 interface & cable 3.USB interface, CF card interface 4.Heat exchanger of electrical cabinet 5.Spindle rigid tapping 6.Arm type tool changer T24 7.Fully enclosed cover 8.Auto centralized lubrication system 9.Coolant system 10.Working light 11.Working signal light 12.3 phase isolated transformer 14.Toolkit for setup 15.Handle air gun & coolant gun 16.Y axis weight balance system 17.Manual pulse generator 18.Leveling bolts and pads 19.Operation maintenance manual | Optional accessories: 1..Mitsubishi or Siemens CNC controller 2.Spindle oil chiller 3.Spindle 8000rpm 4.Spindle 10000rpm 5.Chip conveyor and chip cart 6.Automatic voltage stabilizer 7.NC index table 8.Tool measurement system 9.Workpiece measurement system 10.Linear scale |
Email to this supplier
