ISB 800-3 One Step injection stretch blow molding machine
Product Description
Along with the increasing requirement to high quality and outlook appearance, the products manufactured by the old style extrusion blowing machine cannot fulfill the customer demand any more, the whole process including moulding injection ,stretch blowing and off -moulding can be finished within one step if using the injection blowing molding machine for manufacturing, the product making machine does not contain any flash ,sprue and much less disfigurement, it can present the perfect looking mouth ,bottom and wedding line as well as the better transparent an higher rigidity ,the injection blowing molding products are thinner than old style ones, which can save 50% material ,besides the merit mentioned above, the one step injection blowing moulding machine perform the higher speed and more efficient energy saving.
Suit for : food and beverage bottle for example: jar can cruet etc.
Cosmetic and detergent bottle for example : hand washing liquid bottle, shower gel bottle
Baby feeding bottle and sport bottle for example: student bottle ,vacuum bottle,
juice bottle,baba feeding bottle etc.
Pharmacy bottle for example: medicine bottle, eyedropper bottle, oral liquid bottle etc.
PC bottle and wine goblet for example: juice jug ,beer jug,milky tea jug, wine jug etc.
LED bulb housing ,big safety bulb housing ,for example: 30#--80# 80#-300#
Lotus bulb housing etc.
SIZE: 4.1*1.45*3.30 m
weight : 7T
JASU One Step Injection Stretch Blow Molding Machine Model ISB800-3/ISB800A-3 advantages are as follows:
1. The wheel rotation is driven by electrical servo motor, not hydraulic.
2. Full automatic controlling system, easy operating.
3. The temperature of material barrel and hot runner is controlled accurately by PIT.
4. More cost is saved than traditional machine.
5. Compact structure; less space needed.
6. Injection:
Hot runner and temperature control device are standard configuration. Only change mold for making a new product;
Stretch Blow:
Hydraulic mold clamping, core insert, stretch blow and bottom molding are standard configuration;
Product Release:
Equipped with a standard ejector.
Compare Injection Blow Molding to Extrusion Blow Molding
Injection Blow Moulding | Extrusion Blow Molding |
No scrap | 20-40% scrap during production |
Uniform wall thickness | Wall thickness variation |
Bottle weight variation of 1% | Bottle weight variation of 3% |
Slower cycle time / more cavities | Fast cycle time / less cavities |
Thin walls difficult to control | Thick & thin wall capabilities |
Hollow Handleware not possible | Hollow Handleware |
Necks made with injection molded tolerances | Necks made with blow molded tolerances |
One technician per 4-6 machines | One technician per 1-2 machines |
Process is controlled and repeatable with no adjustments | Variable process requiring constant adjustment |
Almost no ancillary equipment | Lots of ancillary equipment needed |
S/N | Item | Parameter | |||
IB 500-2 | |||||
1 | Injection Part | Screw Diameter | 50mm | ||
2 | Screw L/D Ratio | 20.5:1 | |||
3 | Screw Speed | 0-150r/min | |||
4 | Theoretical Injection Capacity | 481cm³ | |||
5 | Injection Pressure | 176Mpa | |||
6 | Max. Hydraulic Pressure | 140Kg/cm | |||
7 | The Actual Injection Quantity | 452g | |||
8 | 16Oz | ||||
9 | Screw Stroke | 245mm | |||
10 | Clamping Part | Blow Clamping Force | 150Kn | ||
11 | Clamp Tonnage | 600Kn | |||
12 | Wheel Diameter | 800mm | |||
13 | Max. Height of Bottle | 400mm | |||
14 | Open Vertical Mode Trip | 430mm | |||
15 | Other | Max. Pump Pressure | 16Mpa | ||
16 | Motor | 18.5Kw | |||
17 | Electric Power | 12.2Kw | |||
18 | Tank Volume | 400L | |||
19 | Dimension | 4.1X1.45X3.1m | |||
20 | Weight | 5Ton |
Email to this supplier
