V-1060D Vertical Machining Center
Product Description
1. Machine Bed:
JASU V-1060D Machining Center bed is made by the material of HT300 Inoculated cast iron, internal stress eliminated by special method. With the exquisite design, the bed has the excellent performance for machining and accuracy requirements;
2. Guide Rail:
JASU V-1060D CNC Milling Machine adopts the linear guide rail for X/Y/Z axes, load ability improved;
3. Lead Screw:
High-precision and high-quality ball screw is adopted to make sure the positioning accuracy;
4. Spindle Motor:
High-performance motor make sure that the machine performs well at high/low speed and light/heavy cutting(11/15Kw);
5. Electrical Cabinet:
Heat exchanger is installed in electricity cabinet to guarantee the stable of system. Coiler is equipped outside the Vertical Milling Center, it is heat, oil and water-resistant;
6. Lubrication System:
Automatic Centralized Lubrication System of JASU V-1060D CNC Milling Center can provide timely and accuracy lubrication according to the machine situation to enable the machine work continuously;
Specification:
Item | V-1060D |
Worktable | |
Worktable size | 13000 X 600 mm |
T-slot size | 5 X 18X 90 mm |
Max.loading capacity | 1000 kg |
Travel | |
X/Y/Z axis traverse | 1000/600/600 mm |
Spindle nose to table | 150-750 mm |
Spindle center to column face | 600 mm |
Spindle | |
Spindle taper | BT40 |
Spindle speed | 8000 rpm |
Spindle drive | Belt driven |
Feeding | |
Max. cutting feedrate | 5000 mm/min |
Rapid traverse of 3 axes | 30/30/30 m/min |
Ballscrew size | XY: 4010 Z:5010 |
Positioning accuracy (JIS) | ±0.003/300 mm |
Repeated positioning accuracy (JIS) | ±0.003 mm |
ATC | |
ATC type | Arm type |
Tool capacity | 24 |
Max. tool dia. | 80 mm |
Max. tool length | 200 mm |
Max. tool weight | 8 kg |
Tool holder | BT40 |
Tool change time (T-T) | <2.8 Sec. |
Motor power | |
Spindle motor | 11/15 kw |
X/Y/Z axis motors | 3/3/3 kw |
Coolant pump motor | 0.49 kw |
General | |
Air requirement | 8 kg |
Overall Dimension | 3200 x 3100 x 2900 mm |
N.W. | 9000 kg |
Standard accessories: 1.FANUC CNC controller 0i-TF 2.RS-232 interface & cable 3.USB interface, CF card interface 4.Heat exchanger of electrical cabinet 5.Spindle rigid tapping 6.Arm type tool changer T24 7.Fully enclosed cover 8.Auto centralized lubrication system 9.Coolant system 10.Working light 11.Working signal light 12.3 phase isolated transformer 14.Toolkit for setup 15.Handle air gun & coolant gun 16.Z axis weight balance system 17.Manual pulse generator 18.Leveling bolts and pads 19.Operation maintenance manual | Optional accessories: 1..Mitsubishi or GSK CNC controller 2.Spindle oil chiller 3.Spindle 12000rpm 4.Spindle 15000rpm 5.Chip conveyor and chip cart 6.Automatic voltage stabilizer 7.NC rotary table 8.Tool setter 9.Workpiece measurement system 10.Linear scale |
Email to this supplier
